FEATURED PRODUCT - 25X-HD HYPER CONCENTRATE TFR PRE-MIX
THE REAL COST EFFECTIVE ALTERNATIVE - MIX YOUR OWN TRAFFIC FILM REMOVER
25 Litre makes 205 Litre of HIGH QUALITY TFR...
ALBE Chem 25X HD Heavy Duty HYPER Concentrate Traffic Film Remover is a SUPER STRENGTH Concentrated powerful alkaline PRE-MIX product designed to be DILUTED prior to use as a TFR Pre-Spray or for use in Pressure Washer systems.
Use to clean Trucks, Cars, Vans, Coaches... In fact anything... Mix at 10 to 1 for use through a pressure washer or 25 up to 50:1 for pre-spraying prior to washing off. Can also be used as a chassis / engine de-greaser.
The beauty about this product is that you can make YOUR own strength Cleaner / Degreaser to YOUR required strength for the task in hand..
Why pay for ‘ready to use’ Traffic Film Detergents... you are paying for your supplier to ship you water!
Manufactured the highest specification and complying to all EU Directives, ALBE Chem cleaning products are designed to remove the most stubborn traffic film and grease from Paintwork, Chassis, Engine and Plant & Machinery and is used by the Car Valeting, Commercial Road, Rail, Sea and Air Transport sectors and Local Councils throughout the UK.
Now you can trial ALBE Chem 25XHD before you buy with this 1 Litre Trial pack..makes 25 litres of TFR pre-spray or 10 litres of high quality TFR when used through a pressure washer...
Designed to remove Traffic Film, Grease and Grime from all Cars, Vans & Commercial vehicles including HGV, Van Fleets & Passenger Transport etc...
MAKE YOUR OWN HIGH QUALITY TRAFFIC FILM REMOVER
1 x 25 litres makes 200 Litre
4 x 25 Litres makes 1,000 Litre
As used by; Car Valeters, Haulage Contractors, Car Wash Operators, Van & Car Hire Companies, Councils, Utility Companies, Car Enthusiasts etc
... In fact ANYONE that has vehicles to wash!
HOW TO MIX 25X-HD
1. Take 1 empty, clean 205 litre barrel (may have been used previously for TFR / Screenwash but if in doubt call us on 01773 528977 and we’ll let you know the compatibility)
2. Take a hose and put it into the barrel and turn on the tap so the barrel starts to fill.
3. Take the cap off the 25X-HD and pour it (either via a barrel tap and / or funnel) into the alternative opening on the barrel
4. Once the 25X-HD is poured into the barrel, let the water fill the barrel to the top... THATS IT!
You now have a great quality Traffic Film Remover...
You can either use directly via your pressure washer or dilute again (up to 1 part TFR to 10 parts water) if you use as a pre-spray...